A Plug follower<\/a><\/li><\/ul>\n\n\n\nStep-by-step Instructions<\/strong><\/p>\n\n\n\nStart the process by removing the two screws on the inner side of the deadbolt lock face; doing this deadbolt will loosen from both sides of the door.<\/li> With the lock’s interior facing you, hold the cylinder side of the lock in your hand.<\/li> Now, with the help of a flathead screwdriver or a plug-removal tool, remove the clip on the side of the plug. As you move the clip from side to side, it will detach from the plug.<\/li> Now, insert the lock’s key into the cylinder and turn the key ¼-turn clockwise.<\/li> Insert a plug follower on the cylinder’s end and slowly pull the cylinder out of the lock with the help of a plug follower. (A plug follower is a tube with the same diameter as the cylinder you’re attempting to remove from the lock.)<\/li><\/ul>\n\n\n\nHow To Remove A Broken Key From A Kwikset Deadbolt<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\nThings You Will Need<\/strong><\/p>\n\n\n\nA lubricant – As a penetrating lubricant, WD-40 can be used.<\/li> A needle-nose plier- When dealing with tiny and narrow places like a keyhole, an 8-inch needle-nose plier is a perfect tool.<\/li><\/ul>\n\n\n\nStep-by-step Instructions<\/strong><\/p>\n\n\n\nStart by applying a penetrating lubricant within the keyhole before removing the damaged key from the lock. It will aid in loosening the locking mechanism, particularly if your lock is jammed.<\/li> Now, check if the lock is in a vertical position. It needs to be aligned for you to remove the key. If not, you’ll need to rotate the lock’s cylinder vertically or horizontally.<\/li> Use a flat head screwdriver and carefully spin the lock back into its original position, To make extracting a damaged key from a lock simpler.<\/li> Insert a pair of needle-nose pliers into the keyhole after the lock is in the proper position. <\/li> Slowly reach for the key’s fractured section, careful not to press it any farther. Pull it out of the lock with a firm grip on its tip.<\/li><\/ul>\n\n\n\nHow To Remove Kwikset Deadbolt Without Screws<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\nAre you struggling to figure out how to remove Kwikset deadbolt without screws?<\/strong> Don’t worry, my friend, I am here to help you.<\/p>\n\n\n\nFirst, let us discuss where the screws are located that keep the lock intact. The mounting screws are located under the cover plate or base plate. The cover plate helps enhance the beauty of our house and boost security as even the burglar will also not be able to figure out where the screws are located. <\/p>\n\n\n\n
Things You Will Need<\/strong><\/p>\n\n\n\nBefore following the instructions below, ensure you have all the tools for the Kwikset deadbolt removal without the screws. You might have everything you need in your toolbox, but if you don’t then these would be easily available at your nearest hardware store.<\/p>\n\n\n\n
1) A flat head screwdriver<\/strong> It is used to remove the faceplate or cover plate of the deadbolt. You can use a 3\/32 by 1 ½- inch head screwdriver to complete the task.<\/p>\n\n\n\n2) A Phillips head screwdriver<\/strong> You’ll also need a Phillips head screwdriver because most deadbolt mounting screws are Philips-head screws. While using a screwdriver, ensure it’s the proper size. There are five sizes of Phillips head screwdrivers, ranging from 0 to 4.<\/p>\n\n\n\n3) Sharp-edged or pointed awl<\/strong> It is used by shoemakers and carpenters to punch holes in leather or wood by withstanding downward pressure. You can use an awl with a blade width of 2.45 mm.<\/p>\n\n\n\nIf you don’t have an awl, you can use a metal paper clip.<\/p>\n\n\n\n
Step by step Instructions<\/strong><\/p>\n\n\n\nTo open the deadbolt lock, stand inside your home and face the deadbolt lock in such a manner that the keyhole and the thumb-turner lock are visible to you.<\/li> Now, look for the little pin-hole on the shaft of the latch to remove the thumb-turner latch so that mounting screws can be visible to you. To release the latch lever, insert your awl or paper clip into this hole and press it down. <\/li> Once you’ve finished removing the latch’s lever, examine the plate’s rim for a small notch. Remove the base plate with the help of a flat screwdriver. The mounting screws should be visible. <\/li> Using your Philips screwdriver, carefully loosen the two visible mounting screws.<\/li> Grab the lock with both hands from the inside and outside of your home, then pull them apart to remove them.<\/li> In the end, to remove the entire latch mechanism from the hole. To do so, identify the two screws that secure the latch mechanism and remove them using the Philips screwdriver. When you’re finished, remove the latch machine from the hole.<\/li><\/ul>\n\n\n\nHow to Remove Kwikset Deadbolt Faceplate<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\nA faceplate is the most important part of the lock, as it protects the lock from wear and tear. It is essential to learn how to remove Kwikset deadbolt faceplate as you have to remove it while repairing the lock or lever to access the latch and mounting elements on the inside.<\/p>\n\n\n\n
The removal technique varies significantly depending on the design and model, but all varieties may be removed effectively using common home tools.<\/p>\n\n\n\n
Now, let us now read together how to remove Kwikset deadbolt faceplate <\/strong>in easy and simple steps.<\/p>\n\n\n\nThings You Will Need<\/strong><\/p>\n\n\n\nA Philips and flathead screwdrivers<\/li> An Allen wrench<\/li> An Awl or nail<\/li><\/ul>\n\n\n\nStep-by-step Instructions<\/strong><\/p>\n\n\n\n