won’t connect to the Wi-fi<\/a> and won’t notify you of any activity at your door. <\/p>\n\n\n\nHow To Update Firmware On Ring Doorbell : <\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nOn the Ring App, tap open the Menu <\/strong>and select your doorbell<\/strong>, from Devices.<\/li>Now, tap Device Health<\/strong> and then, select the option Device Details<\/strong>. <\/li>There you have, the firmware details<\/strong> of your Ring Doorbell. <\/li>If it says ‘up-to-date’<\/strong>, your Ring doorbell is running on the latest available firmware. <\/li>If it shows ‘Update’<\/strong>, there’s a pending update that needs to be installed.<\/li>Tap on Update<\/strong>, to launch the latest version of firmware on your Ring Doorbell. <\/li><\/ol>\n\n\n\nApproximately, it takes around five minutes for a new update to be downloaded and installed on the Ring doorbell. Do not turn the Ring doorbell ‘off’ during this time and wait patiently for the process to finish. Now, check if the flashing lights have turned off and if the Doorbell is working. <\/p>\n\n\n\n
Nonetheless, after all these steps, if you still have your Ring doorbell stuck in setup mode<\/strong>, factory reset the Ring doorbell, to fix this issue. <\/li><\/ul>\n\n\n\n5. Factory Reset the Ring Doorbell ;<\/strong><\/h3>\n\n\n\nBefore you proceed to reset your Ring doorbell, you should have certainly used the above mentioned methods to fix your Ring doorbell because you must know, a hard reset erases all the data from the doorbell and you’ll have to set it up from the beginning. <\/p>\n\n\n\n
How To Reset The Ring Doorbell :<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nTake a screwdriver and unscrew the Ring doorbell from the mounting bracket.<\/strong><\/li>Locate the orange button at the back of the doorbell.<\/strong><\/li>Now, press and hold this orange button for at least 10 seconds. Then, release. <\/strong><\/li>The lights on the doorbell will start flashing when this button is released. <\/strong><\/li>Once this process of reset is over, the lights will stop flashing, indicating that the doorbell is now reset and is back to its default settings. <\/strong><\/li><\/ol>\n\n\n\nSet Up the Ring Doorbell once again : <\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nOpen the Ring App and login <\/strong>into your Ring account<\/strong> using your previous credentials.<\/li>Now, click on Set Up A Device.<\/strong> From the displayed options, select Doorbells<\/strong>.<\/li>You’ll find a QR Code<\/strong> or the MAC ID,<\/strong> at the backside of your Ring doorbell. Scan it on the Ring App. <\/li>The Ring App will recognize the Code and then, you enter your location<\/strong>. You can also choose to allow the App to access your location<\/strong>.<\/li>The last step is to Name your device<\/strong>. <\/li><\/ol>\n\n\n\nConnect the Ring Doorbell Once It’s Set Up<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nGo back to the Ring Doorbell and once again, press the Orange <\/strong>button at its backside.<\/li>Press once and then, release<\/strong>. You’ll notice a white light on the doorbell that spins.<\/strong><\/li>This means, the Ring doorbell is in the set up<\/strong> and ready to be connected<\/strong> to the Wi-fi.<\/li>The connection should occur automatically since it’s a saved home connection. If it doesn’t, enter the Wi-fi password manually<\/strong> and tap to Connect. <\/li><\/ol>\n\n\n\nNow, check if the Doorbell is working and is out of the boot loop. After a hard reset and a fresh connection, any possible connectivity glitches because of which you had the Ring doorbell stuck in boot loop<\/strong>, have been fixed. You should be able to use your Ring Doorbell very well, now.<\/p>\n\n\n\nHow To Fix The Ring Camera Stuck In Setup Mode<\/strong><\/h4>\n\n\n\nIf you also have your Ring Camera stuck in Setup mode<\/strong>, it can be easily fixed by performing a hard reset on the Camera, without even removing it from the Ring App. <\/p>\n\n\n\nLift the small cover on the back of the Ring Camera and you’ll find the reset button.<\/strong><\/li>Now, press and hold this button for about 20 seconds.<\/strong> <\/li>A blue light will begin to flash on the Ring Camera, signifying that the Camera is in Setup Mode.<\/strong><\/li>Once the light turns into a Solid blue, the Camera is set up and is ready to function.<\/strong><\/li><\/ol>\n\n\n\nAlong with resetting the Ring Camera, ensure that the Camera is properly plugged in and is connected to the internet connection. <\/p>\n\n\n\n
FAQs<\/strong><\/h2>\n\n\n\nQ1. Why is my Ring Doorbell not connecting during setup?<\/strong><\/p>\n\n\n\nAnswer – <\/strong>In most of the cases, there can be four reasons for your Ring Doorbell to be stuck while setting up. Either you have entered an incorrect password, your Ring doorbell is placed very far off from the Wifi router, an issue with your internet connection or any hardware issue with your router. To fix your Ring doorbell in such a case, you’ll have to fix these issues, first. <\/p>\n\n\n\nQ2. What are Ring Mode Settings?<\/strong><\/p>\n\n\n\nAnswer – <\/strong>There are Modes in the Ring App which are basically, Settings<\/strong>. Using these Settings, you can easily control the behaviour of your Ring Devices and configure your Cameras and doorbells, to protect your home in different ways. <\/p>\n\n\n\nQ3.What mode should my Ring doorbell be on ?<\/strong><\/p>\n\n\n\nAnswer – <\/strong>If you set your Ring doorbell in Home mode, the indoor camera will not detect motion and there’ll be no Live-View available on your front door. However, if your doorbell is set in Away Mode, you can monitor your house inside out, as a whole. Before you leave home, select this mode on your Ring doorbell. It will activate the Ring doorbell, Cameras and the alarms and you’ll be able to access all the activities at your house. <\/p>\n\n\n\nQ4. Why has my Ring doorbell stopped working ?<\/strong><\/p>\n\n\n\nAnswer – <\/strong>If the RIng doorbell has been installed incorrectly, the Wi-fi signals are weak, there is no power on the doorbell, or if there’s a wiring issue, the Ring doorbell stops working. <\/p>\n\n\n\nQ5. Do Ring Doorbells work without the internet ?<\/strong><\/p>\n\n\n\nAnswer – <\/strong>No. The Ring doorbell requires an internet connection necessarily to work. You’ll need a stable internet connection at the very first step itself, i.e while setting the doorbell up. Further, you won’t be able to use these Ring doorbells on their Ring App and use any of the features without a strong internet connectivity. <\/p>\n\n\n\nConclusion <\/strong><\/h2>\n\n\n\nThere can be various different reasons for your Ring doorbell to be stuck in a setup mode and you can find fixing this issue pretty baffling if the power, Voltage, batteries and the Ring doorbell are in a perfectly working condition. In that case, this issue can only be fixed by performing a hard reset on the doorbell. <\/p>\n\n\n\n
If you have either the Ring Doorbell 2 or the Pro model, the reset button will be of black colour, instead of an orange. <\/p>\n\n\n\n
I am most certain that using the fixes explained above, you’ll be able to get your Ring doorbell out of the boot loop mode and find it working again, but if unfortunately, nothing worked, the best solution is to contact the Ring Support Team. <\/p>\n\n\n\n
If your Ring doorbell falls under warranty as yet and is either defective or damaged, Ring will replace it for free. Also, let them know about the fixes you have already tried on your Ring doorbell so that you can get the best possible solution in the quickest timespan. <\/p>\n","protected":false},"excerpt":{"rendered":"
… Read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":8098,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_mi_skip_tracking":false,"footnotes":""},"categories":[2,26],"tags":[214],"yoast_head":"\n5 Easy Fixes For A Ring Doorbell Stuck In Boot Loop ! - BringUpToDate<\/title>\n \n \n \n \n \n \n \n \n \n \n \n \n\t \n\t \n\t \n \n \n \n\t \n\t \n\t \n