Discover All Magnavox Universal Remote Codes Under One Roof

Are you also tired of managing the different remotes scattered over your home? If your answer is yes, then you are on the right page, as I will show you how to switch to a single device using Magnavox universal remote codes.

Yesterday, I went to my friend Tim’s house to meet him. I saw his mom scolding him for not keeping his remotes in one place.

I own a universal remote and have already done extensive research on LG Universal Remote Codes. Therefore, I decided to help out my friend by gathering all codes for a Magnavox universal device in one place.

So if you have been searching for these remote codes, please do explore the lists below.

What are the Devices We Can Program Via the Magnavox Universal Remote With?

Did you know that you can program the remote to control other devices as well? Here’s a list of the devices that you can use to

• TV
• DVD Players
• Streaming setups
• Cable Boxes, etc.

Here Are the Codes for a Magnavox Universal Remote

You have now seen the devices that can be programmed with Magnavox Universal Remote. It’s time to move on to the different codes that are used to program a Magnavox universal device:

All-In-One Magnavox Universal Remote TV Codes	Magnavox Universal Remote Codes 4 digit	Magnavox Universal Remote Codes For VIZIO TV
1060	0011	0104
1056	0008	0046
1004	0003
2000	0001
3211	0005
1414	0009
0044	0010
0047	0013
0022	0006
0082	0004
1050	0012
1081	0007
	0002
	0017
	1053

Magnavox Universal Remote Codes For DVD Player

Below given are the 3- and 4-digit Magnavox control codes for a DVD Player:-

Magnavox DVD Player Remote Control Codes	Magnavox DVD Player Remote Control Codes
162	0408
	0456
	0915
	0918
	0979
	0980
	0914
	0969

Magnavox Universal Remote TV Codes	Magnavox Universal Remote MC345 Codes	Magnavox Universal Remote Codes For Sanyo TV	Magnavox Universal Remote Codes For LG TV	Magnavox Universal Remote Codes For Onn TV
1056	0110	0123	0103	5006
1057	0115	0048	0017	5009
1059	0116	0035	0021	5012
1060	0123	0039	0026	5018
1061	0126		0027
1083	0040		0122
1004	0040		0124
1007	0044		0038
1018	0058
1047	0086
	0091
	0018

Magnavox Universal Remote Codes For Insignia TV	Magnavox Universal Remote Codes For Samsung TV	Magnavox Universal Remote Codes For Roku TV	Magnavox Universal Remote Codes For Philips TV	Magnavox Blu Ray Player Remote Codes	Magnavox Blu Ray Player Remote Codes
0103	0102	0269	0110	0731	20675
0120	0132	0270	0115	0800	21354
0130	0095		0018	0666	20646
0040	0031		0019		21506
0069	0032		0123		20539
0074	0033		0077		21177
0089	0034		0086		21472
0091	0038				20503
0094	0047				22229

How to Program the Magnavox Universal Remote Control for TV and Other Devices?

Here’s the manual method:

• Start by turning on your device.
• On your Magnavox universal remote, select TV.
• Now press and hold the Setup button on your universal remote until the blinking light appears (it means that it is in Learning mode).
• Finally, type in the Keycode that you found in the programming instructions.
• Hold your remote at the TV and then press and hold the Power button.
• When the screen turns off, you can release the Power button.

Code Search Method

Alternatively, you can also use the Code Search Method can be used if you the manual method doesn’t work out for you.

Given below are the Magnavox universal remote instructions; follow them to program your universal remote with any device.

• Firstly, turn on your appliance.
• Now tap and hold the Setup button.
• Type the code 9-9-1.
• Now press the Power Button on your universal remote and then press the Channel up and down keys on the remote until the device switches off.

What Are the Steps To Program Philips Magnavox Universal Remote?

• Hold the Code Search button down. This button is placed in the Philips remote’s upper left corner. 
• Once the red indicator light remains illuminated, release the Code Search button. 
• Press and hold the selected mode button (TV, DVD, etc.) for a few seconds.
• Use the code given above to find the three-digit code. (Note: The red signal goes off once a valid code is entered. The red indicator only glows when the code is invalid.)
• Turn on your device and keep pressing the Channel Up button.
• No more programming is necessary if the gadget reacts.

How to Program the Universal Remote Control to Work with the Magnavox DVD Player?

Step1: Turn on your Magnavox DVD player. Check that DTA is turned on and that it is configured properly.

Step 2: Go near the device you want to configure with your universal DVD remote.

Step 3: On your universal remote, look for the PROG option. Hold the button down until your remote’s little LED light illuminates. Activate the Info button.

Step 4: If you followed the previous three steps correctly, the little LED light should continue to flicker.

Step 5: Enter the correct code for your device. Once you have the right code, your DVD will say Success. If it doesn’t work, try a different code. 

If you entered the wrong code, your DVD would say Sorry. You can repeat the above steps if something goes wrong in between.

Step 6: At the end, press any of the function keys on your universal remote control.

FAQs

Q.1 How to tell if a Magnavox remote control is a universal remote control?

Answer –

• Some Magnavox televisions come with universal remote controllers. 
• Other than the Magnavox TV, the remote may be able to control other appliances as well. 
• Look for the Set and Mode keys to determine if your Magnavox remote is universal. If it does that, it’s a universal remote.

Q.2 How do you use the codes for a Magnavox universal control device?

Answer –

• Turn on the television and check that the remote’s cells are in good condition. 
• Simultaneously hold the TV and SEL buttons for some seconds.
• Calculate the distance from the TV when the button is glowing, then input the TV’s 3, 4, or 5-digit code.

Q.3 How do you get your TV’s four-digit code?

• Locate the code section of your remote control’s User’s Manual. The handbook has a different list of codes for the remotes. 
• Some of the codes are printed on a sheet of paper with the handbook, while others are on the manual itself. 
• Find the code and test it out to see if it matches your television remote.

Q.4 Can you use a universal remote on Roku TV?

Answer:

Yes you can use a universal remote with Roku TV. In-fact I have done a detailed post on how to use universal remote for Roku.

Conclusion

As you have read till here, I hope that you found the correct code for your universal remote. I have tried to list all the universal remote codes and programming guides that will help you connect your universal remote with the desired device.

If you feel that some codes are missing, you can share them with us in the comments below, as it will significantly help our readers.