Hisense TV Won’t Turn On? Here are 5 Fixes to Apply!

Today I am back with another Hisense topic. Some users have asked me about the possible fixes if their Hisense TV won’t turn on? If you face this problem, you’re in the perfect place. This article will discuss five fixes that can solve this problem.

Reasons for Hisense TV Not Turning On

Generally, the reasons for a TV not turning on is more or less the same for all the brands be it Hisense or VIZIO. In-fact , I covered this topic extensively for VIZIO here. 

Before moving towards the solutions for the ‘Hisense TV won’t turn on’ problem, you need to know the reasons that cause this problem in the first place.

A Problem in Power Socket

The most common reason behind your Hisense TV not turning on could be the power socket to which your TV is connected. I have seen this in many instances when a TV is not connected properly to the power outlet, and people complain that their TV is not turning on.

Check that your TV is connected properly to the power socket, else it won’t start. There are also instances when the TV is connected just fine to the socket but the socket itself is not working properly. In that case, simply plug your TV to a different power socket.

Check your Remote

Sometimes, the problem remains with your remote and not your Hisense TV. There might be some damage to your remote for which it is unable to send signals to your Hisense TV. I have also done an extensive article on Hisense TV remote problems.

These can be because of the dead batteries, or your remote might be damaged. Also, it might happen if there is something between the TV and remote obstructing the signals. Make sure there isn’t any opaque object between the two devices.

Check the Inputs

Another reason your Hisense TV might not turn on could be wrong input to the TV. Check if all the HDMI inputs are appropriately connected or not, as they play the most important role in the display. In case you are looking to change input, you can refer to this article of mine – How to change input on Hisense Tv.

Above listed reasons are the most common factors due to which your Hisense might not be turning on.

Based on these reasons, I have listed down 5 fixes that you could apply before calling a technician. 

5 Fixes for Hisense Smart TV Not Turning on

If you see that your Hisense Smart TV isn’t working, no need to worry. Try some simple techniques to sort out the problem. I’ve listed them below.

Reset your TV

One of the best ways to recover your Hisense TV is to reset it. Here’s how to do it:

Step I: First, remove all the connected devices and the power cable from your TV.

Step II: Access the power button of your TV, located either on the back or side of your model and press and hold it for at least 30 seconds.
This process will drain all the power from your TV, and you will be able to start it.

Step III: After the process is done, wait for a minimum of 30 minutes and then turn your TV back ON.

Unplug all the Network Devices

You will often see the Hisense TV flashing red light or a blue light 2 to 6 times and won’t turn on. This problem generally occurs due to the connection of your TV to which it is connected. Try resetting your router or modem, from where the internet comes to the TV.

Step I: For a router, to reset it, keep it plugged into your TV.

Step II: Find the reset button located at either bottom or the back of your device, and hold it for 30 seconds.

Step III: Release the button, and wait for the router to power back on.

Now check if your Hisense TV is running smoothly or not.

Check the Backlight

Another common hardware issue obstructing Hisense TV from turning on is LED backlights failure. Your TV will not display any picture; however, the sound might work well, with the Hisense TV red light blinking. LED backlights generally fail due to a shortage in either power board circuitry or the mainboard.

Here’s what to do:

Step I: First, turn on a flashlight (phone flashlight can work) and point it to your Hisense TV at a close distance.

Step II: See minutely onto the TV screen and observe if there is any visible content.

If you see anything, you’re sure that the backlight is broken. It is a significant problem, and you alone can’t fix it. Call an expert to repair the backlights or buy a new one.

Hardware Problem

Apart from the issues mentioned above, some hardware problems can also be present in your TV. Some of them are listed below.

• If you see the Hisense TV flashing red light while pressing the power button of your remote, then the power board of your TV has a fault and needs to be replaced.
• If you can’t see the Hisense TV red light blinking and the red LED light is still displaying, your mainboard has the issue.
• Sometimes your Hisense TV might have a flickering screen, i.e., the screen image disappearing after some seconds or taking time to start; you may need new capacitors on the circuit board.

It is a problem that happened to my friend once. He said, “My Hisense TV turns on then off immediately.” I told him about this, and it needs to be repaired by a technician.

Hard Reset

One of the best ways to make your Hisense TV turn on is by performing a hard reset.

Here’s how to do it:

Step I: First, access the reset button located at the bottom of your Hisense TV.

Step II: Press it for a minimum of 15 seconds, and hold it until the TV starts.

Step III: This will set the TV to restore defaults, and you will be able to set your TV from the beginning, i.e., pair your remote, set passwords, etc.

Hisense Roku TV Won’t Turn On? Here’s What to Do!

Some people have also asked me for a solution to the ‘Hisense Roku TV won’t turn on’ problem.

You guys know that Roku allows us to watch free and paid video content on TV through the internet. You might face the ‘Hisense Roku TV not turning on’ problem, for which you need to reset it.

Like the Hisense Smart TV, you might see the Hisense Roku TV flashing red light but not displaying any picture. In-fact I have done a detailed article on Roku blinking light issue.

Also, I have seen instances where the Hisense TV power light blinking but not turning on. For all these problems, you need to reset it, which will sort out the problem. If it doesn’t, you need to contact your customer operator.

Here’s how to do it:

Step I: First, you need to power on the Hisense Roku Smart TV and then click on the Menu button on the TV remote.

Step II: You need to click on the Support option either by pressing the Enter or the OK button on the remote. 

Step III: Next, you need to pick the Self Diagnosis option under the Support menu, and press Enter or OK. 

Step IV: Now, keep scrolling down until you come across the Reset option. 

Step V: Once you select it, it will ask you for a security key or pin in the Hisense TVs user manual or guide. 

Step VI: After entering the pin, you can resent your Hisense Roku Smart TV. 

Step VII: The resent method will now get started. After the TV restarts, it will be reset to its factory settings.

FAQs

Q1. Where is the reset button on Hisense TV?

Answer – You will spot a reset hole either at the back or bottom of your Hisense TV. To detect a small hole labeled “RESET,” you need to look around your TV a little. Then, bend a paper clip to have it inserted into the hole. Follow it up by pushing the clip inside the hole and pressing it for at least 15 seconds.  

Q2. How long does a Hisense TV last?

Answer – Most televisions have a span of between five and ten years. 

Q3. Why do my Hisense Tv have a black screen?

Answer – Your Hisense Tv can show black screen due to host of reasons. I have covered all the reasons and their fixes here – Guide to Fix Hisense Black Screen.

Quick Recap

So guys, always remember that if your Hisense TV has some inner software or hardware problems, it is always better to consult a specialist near you. In case of some minor issues, including checking the power outlet, resetting the TV, etc., you can handle it yourself. Apply the steps mentioned in the Hisense TV won’t turn on section and enjoy the service with ease.